Azden 411XT Performance Series XLR Plug-in UHF Wireless Microphone System Get Azden 411XT Price / Buy Online

Shop our online store Shop With Confidence! Video Direct® is an Authorized Internet e-tailer for Azden and Many Other Fine Brands!

The 411XT is a complete system which includes the 51XT wireless XLR plug-in UHF transmitter and the 411UDR receiver.

The 411UDR and is a crystal controlled, PLL synthesized receiver with 63 on-board user selectable UHF frequencies with a range of 794MHz to approx. 806MHz. It is true diversity, containing two separate receivers, each operating on the same frequency. The transmitter's output signal is monitored constantly by a diversity circuit, which switches automatically to the receiver with the stronger RF signal. This allows wireless performance that is virtually drop-out free, even under the most adverse conditions. The 411UDR features both 1/4-inch and XLR output jacks and volume adjustment, and can be rack mounted with the 321RK kit. Up to 9 systems may be used simultaneously. An AC Adapter is included with the 411UDR.

The 411UDR will work flawlessly with the Azden 51XT frequency-agile transmitter with 63 on-board user selectable UHF frequencies. The 51XT is a compact plug-in transmitter which converts low-impedance microphones to wireless. Using a special 'lock-down' XLR connector for a secure grip, the transmitter is powered for more than 8 hours by a single 9V Alkaline battery. Featured are a separate On/Off switch (with LED indicator), an Audio Standby switch as well as a microphone input level control with Peak indicator LED (allowing the adaptor to transmit the output of a soundboard as well). Additionally, the 51XT provides switched phantom power.

Azden 411UDR UHF Wireless Receiver

Azden 411UDR Key Features

63 User-Selectable Frequencies

The 411XT is a frequency agile system, meaning that you choose the frequency of both the transmitter and receiver via the group and channel controls. The group knob allows you to select any of seven frequency groups (numbered from 0-6). The channel knob allows you to select any of nine frequency channels (numbered from 0-8) within the selected group. This method of group/channel selection provides 63 possible choices (794-806Mhz).

Crystal-Controlled and PLL-Synthesized

The crystal-controlled, PLL-synthesized mixer/local oscillator provides for extremely accurate frequency selection.

Antenna A/B LED Indicators

When the transmitter is turned on and is in reception range of the receiver, either the A or B LED will light up RED, depending on which receiver circuit is getting the strongest signal from the transmitter. Flickering between the A and B LED is a normal indication of the diversity front-end working to reduce multipath distortion.

Peak LED Indicator

This indicator lights when the receiver's input level from the transmitter exceeds unity.

Power LED Indicator

The 411UDR's Power LED will illuminate as soon as the unit is plugged in.

Dual Antennas With BNC Connectors

A true diversity front end with twin antennas reduces multipath distortion caused dropouts to near zero. The supplied antennas are connector mounted (BNC) so that they can be disconnected and/or removed.

12V DC Input

Plug the supplied AC adapter into the 12 volt input on the receiver then into an AC electrical outlet.

Output Adjustment

Rotate this knob clockwise to increase, or counterclockwise to decrease volume level.

Balanced and Unbalanced Output

The 411UDR features both 1/4-inch and XLR output jacks and volume adjustment.

Tone-Code Squelch

Switching the Audio to OFF on the microphone will cause the receiver to mute due to the tone squelch circuitry in the receiver. This allows the microphone to be handled with no noise.

Azden 411UDR Specifications

RF Carrier Frequency Range:

793 - 806 MHz

Frequency Response:

20Hz - 20kHz

Audio Distortion:

less than 1.0% ±15K deviation

Dynamic Range:

better than 100dB

S/N Ratio:

better than 95dB

Operating Temperature:

32º ~ 113º F (0º ~ 45º C)

Operating Range:

100m under ideal conditions

Oscillator:

PLL synthesized

Tone Squelch Frequency:

32.768KHz

Diversity Type:

True Space Diversity

Receiver Type:

Super Heterodyne, PLL Synthesized

Image Rejection:

Better than 60dB

Reception Sensitivity:

Better than 16dBµV

Reception Selectivity:

±150kHz

Audio Output Adj. Range:

-30dB, ctr 0dB, max +6dB

Audio Output Impedance:

2.2 k ohms unbal., 660 ohms bal.

Power Requirements:

12V DC 300mA

Dimensions (W x D x H):

11" x 4.7" x 1.4" (280 x 120 x 37 mm)

Weight:

29 oz (920 g)

Supplied Accessories:

2 Antennas, Screwdriver, Velcro, AC Adapter

Azden 51XT Wireless XLR Plug-in Transmitter

Azden 51XT Key Features

Plug-in XLR Microphone Transmitter

Convert any XLR microphone into a wireless. Usng a special lockdown XLR connector for a secure grip on your mic, the 51XT is powered by a standard AA alkaline battery.

Input Level Control

The audio input level control enables you to adjust the input level of the microphone. Turn clockwise to increase, or counter-clockwise to decrease the input level. A small screwdriver is supplied to make these adjustments.

Power and Audio Switches

The power ON and OFF switch enables and disables all transmitter functions while the Audio switch ON and OFF turn just the transmitter's audio signal on and off. Switching the Audio to OFF will cause the receiver to mute due to the tone squelch circuitry at the receiver. This allows the microphone to be handled with no noise.

63 User-Selectable Frequencies

The group knob allows you to select any of seven frequency groups (numbered from 0-6). The channel knob allows you to select any of nine frequency channels (numbered from 0-8) within the selected group. This method of group/channel selection provides 63 possible choices (794-806Mhz).

LED Power and Peak Indicators

AF PEAK - this indicator lights when the receiver's input level from the transmitter exceeds unity.

POWER - with fresh batteries, this LED lights red when the power switch is turned ON. When the battery level drops to 4 volts this LED will flash on and off. When this happens it is time to replace the batteries.

Switched Phantom Power

Allows you the flexibility to use dynamic or condenser microphones (9V or less) with the 51XT.

Azden 51XT Specifications

Frequency Range:

UHF 63 ch. (793-806MHz)

Type of Emission:

FM

Antenna:

Internal

Antenna Pre-emphasis:

50 Micro Sec

MAX Input Level:

-7dBm

Microphone Unit:

Dynamic microphones, 9V or less condenser microphones

RF Output Power:

15mW (50mW max)

Input Impedance:

6k ohms

Audio Adj Range:

-63dBm ~ -18dBm

Battery:

One 9V (not included)

Battery Life:

6 to 8 Hours with Alkalinc Battery

Dimensions:

40 x 40 X 99(L) mm - (1.6" x 1.6" x 3.9")

Weight:

152g without Battery - (5.4 oz)

Back to Azden UHF Wireless Microphone/Receiver Systems