Azden 200ULX Dual-Channel On-Camera UHF Wireless Microphone System Get Azden 200ULX Price / Buy Online

Shop our online store Shop With Confidence! Video Direct® is an Authorized Internet e-tailer for Azden and Many Other Fine Brands!

The 200ULX is a complete system which includes the 200UPR dual-channel camera-mount receiver, one 10BT body-pack transmitter with the EX-503H electret condenser lavalier microphone and one 51XT UHF wireless XLR plug-in transmitter.

Azden Corporation, the leader in wireless for videography, introduces the Azden 200UPR UHF wireless receiver. The 200UPR features dual receivers, each with 63 user-selectable channels in the 794-806MHz band and allows the use of two wireless transmitters at the same time.

Unlike the entry-level models of its competitors, which have 1, 2, 10 or 16 channels, the Azden 10BT body-pack transmitter offers 63 user-selectable channels in the 794-806MHz band. The body-pack transmitter is housed in a compact, 3-7/8" x 2-3/8" x 13/16" case and comes with the EX-503 electret condenser lavalier microphone. Other microphone options are available, see Recommended Accessories.

The Azden 51XT plug-in transmitter incorporates improvements that will be welcomed by both audio and videography professionals. The 51XT is a compact plug-in transmitter which converts low-impedance microphones to wireless. Using a special 'lock-down' XLR connector for a secure grip, the transmitter is powered for more than 8 hours by a single 9V Alkaline battery. Featured are a separate On/Off switch (with LED indicator), an Audio Standby switch as well as a microphone input level control with Peak indicator LED (allowing the adaptor to transmit the output of a soundboard as well). Additionally, the 51XT provides switched phantom power.

Azden 200UPR Dual-Channel Camera-Mount Receiver

Azden 200UPR Key Features

Dual Channel On-Camera UHF Receiver

The 200UPR features dual receivers, each with 63 user-selectable channels in the 794-806MHz band and allows the use of two wireless transmitters at the same time.

63 User-Selectable Frequencies

The 200UPR is a frequency agile system, meaning that you choose the frequency of both the transmitter and receiver via the group and channel controls. The group knob allows you to select any of seven frequency groups (numbered from 0-6). The channel knob allows you to select any of nine frequency channels (numbered from 0-8) within the selected group. This method of group/channel selection provides 63 possible choices (794-806Mhz).

Crystal-Controlled and PLL-Synthesized

The crystal-controlled, PLL-synthesized mixer/local oscillator provides for extremely accurate frequency selection.

High Gain Antennas With BNC Connectors

Separate On/Off and Frequency Selectors For Each Channel

The 200UPR receiver features two recessed On/Off switches, two Power On/Signal Received LED and 2 sets of channel selectors to set the desired frequency for each receiver.

Mini-to-Mini and Mini-to-Dual-XLR Cables Included

The 200UPR features a 3.5mm -64dbB 2-channel mic level output jack.

Camera Shoe-Mount Included

The receiver comes with a "hot-shoe" mount.

Uses AA Batteries

The 200UPR operates for better than 8 hours on 6 AA batteries (not supplied).

Azden 200UPR Specifications

Frequency Range:

UHF 63-Channel Selectable (793.750-805.875MHz)

Type of Reception:

2 Channel Receiver

Oscillator:

PLL Synthesized

RF Squelch Level:

13dBµV

Frequency Response:

50Hz - 15kHz

S/N Ratio:

>70dB "A" Weighted

Audio Distortion:

<1% @ 1kHz

Operating Temp:

0ºC - 45ºC (32ºF -113ºF)

MIC Out:

-64dBm @ 600 W - 3.5mm Mini-Jack

Power Requirement:

Six 1.5V AA Alkaline Batteries or 12VDC @ 200mA

Battery Life:

6 - 8 Hours w/Alkaline Batteries

Dimensions (W x D x H):

4.13" x 4.13" x 1.38" (105 x 105 x 35 mm)

Weight:

Approx. 17.28 oz. Including Battery (490g)

Supplied Accessories:

shoe-mount holder, 3.5mm-to-3.5mm output cable and a 3.5mm-to-twin XLR cable

Azden 10BT UHF Wireless Body-Pack Transmitter

Azden 10BT Key Features

Metal Belt Clip

The 10BT transmitter comes with a belt clip. It is small enough to also be tucked into a jacket or pants pocket.

Power and Standby Switches

The power ON and OFF switch enables and disables all transmitter functions while the STANDBY switch turns the audio off and on. This allows the microphone to be handled with no noise.

Power On LED Indicator

63 User-Selectable Frequencies

The group knob allows you to select any of seven frequency groups (numbered from 0-6). The channel knob allows you to select any of nine frequency channels (numbered from 0-8) within the selected group. This method of group/channel selection provides 63 possible choices (794-806Mhz).

Operates on One 9V Battery

Using one 9V battery, the 10BT can operate for more than 8 hours.

Supplied Accessories

Omni-Directional Lavalier Electret Condenser (EX503H)
Metal Belt-Clip

Azden 10BT Specifications

Included Microphone Unit:

EX-503H electret condenser lavalier microphone

Frequency Range:

UHF 63-Channel Selectable (793.750 - 805.875MHz)

Oscillator:

PLL synthesized

RF Output Power:

10mW (30mW MAX)

Frequency Response:

50HZ to 15KHz

Max Deviation:

±75kHz @ 1kHz Modulation, MIC Input -11dBm

S/N Ratio:

>70dB "A" Weighted

Audio Distortion:

less than 1.0% @ 1KHz

MIC Sensitivity:

±40kHz @ -22dBm MIC Input (0dBm +0.775V)

Operating Temperatures:

0ºC to 50ºC (32ºF-122ºF)

MIC Input Connector:

3.5mm Mini Jack

Power Requirement:

One 9V Alkaline Battery

Battery Life:

6 - 8 Hours w/Alkaline Battery

Dimensions (W x D x H):

2.44" x 3.94" x 0.87" (62 x 100 x 22 mm)

Weight:

Approx. 4.23 oz. Including Battery (120g)

Azden 51XT Wireless XLR Plug-in Transmitter

Azden 51XT Key Features

Plug-in XLR Microphone Transmitter

Convert any XLR microphone into a wireless. Usng a special lockdown XLR connector for a secure grip on your mic, the 51XT is powered by a standard AA alkaline battery.

Input Level Control

The audio input level control enables you to adjust the input level of the microphone. Turn clockwise to increase, or counter-clockwise to decrease the input level. A small screwdriver is supplied to make these adjustments.

Power and Audio Switches

The power ON and OFF switch enables and disables all transmitter functions while the Audio switch ON and OFF turn just the transmitter's audio signal on and off. Switching the Audio to OFF will cause the receiver to mute due to the tone squelch circuitry at the receiver. This allows the microphone to be handled with no noise.

63 User-Selectable Frequencies

The group knob allows you to select any of seven frequency groups (numbered from 0-6). The channel knob allows you to select any of nine frequency channels (numbered from 0-8) within the selected group. This method of group/channel selection provides 63 possible choices (794-806Mhz).

LED Power and Peak Indicators

AF PEAK - this indicator lights when the receiver's input level from the transmitter exceeds unity.

POWER - with fresh batteries, this LED lights red when the power switch is turned ON. When the battery level drops to 4 volts this LED will flash on and off. When this happens it is time to replace the batteries.

Switched Phantom Power

Allows you the flexibility to use dynamic or condenser microphones (9V or less) with the 51XT.

Azden 51XT Specifications

Frequency Range:

UHF 63 ch. (793-806MHz)

FM

Antenna:

Internal

Antenna Pre-emphasis:

50 Micro Sec

MAX Input Level:

-7dBm

Microphone Unit:

Dynamic microphones, 9V or less condenser microphones

RF Output Power:

15mW (50mW max)

Input Impedance:

6k ohms

Audio Adj Range:

-63dBm ~ -18dBm

Battery:

One 9V (not included)

Battery Life:

6 to 8 Hours with Alkalinc Battery

Dimensions:

40 x 40 X 99(L) mm - (1.6" x 1.6" x 3.9")

Weight:

152g without Battery - (5.4 oz)

Back to Azden UHF Wireless Microphone/Receiver Systems