Azden 511DRH Performance Series Half-Rack True Diversity UHF Wireless Receiver Get Azden 511DRH Price / Buy Online

Shop our online store Shop With Confidence! Video Direct® is an Authorized Internet e-tailer for Azden and Many Other Fine Brands!

Housed in a metal half-rack sized enclosure, the AC-powered 511DRH receiver with improved circuitry replaces the 411DRH. The 511DRH and is a crystal controlled, PLL synthesized receiver with 63 on-board user selectable UHF frequencies with a range of 794MHz to approx. 806MHz. It is true diversity, containing two separate receivers, each operating on the same frequency. The transmitter's output signal is monitored constantly by a diversity circuit, which switches automatically to the receiver with the stronger RF signal. This allows wireless performance that is virtually drop-out free, even under the most adverse conditions.

The 511DRH receiver has twin LED indicators that indicate antenna reception and signal strength as well as LED indicators for audio signal strength. Channel selection and power on/off controls are located on the front panel, while the rear panel has the XLR balanced and 1/4-inch unbalanced output connectors, a variable squelch control, a variable output level control, and two BNC antenna connectors. Up to nine separate systems may be used simultaneously. The 511DRH can be rack mounted with the optional HR1 or HR2 kits. The HR1 will rack mount a single 511DRH receiver, while the HR2 will mount two.

The 511DRH will work flawlessly with the Azden 51BT, 51HT and 51XT frequency-agile transmitters.

Azden 511DRH UHF Wireless Receiver Key Features

63 User-Selectable Frequencies

The 511DRH is a frequency agile system, meaning that you choose the frequency of both the transmitter and receiver via the group and channel controls. The group knob allows you to select any of seven frequency groups (numbered from 0-6). The channel knob allows you to select any of nine frequency channels (numbered from 0-8) within the selected group. This method of group/channel selection provides 63 possible choices (794-806Mhz).

Crystal-Controlled and PLL-Synthesized

The crystal-controlled, PLL-synthesized mixer/local oscillator provides for extremely accurate frequency selection.

Twin LED Indicators for Antenna Reception and Signal Strength

When the transmitter is turned on and is in reception range of the receiver, either the A or B LED will light up RED, depending on which receiver circuit is getting the strongest signal from the transmitter. Flickering between the A and B LED is a normal indication of the diversity front-end working to reduce multipath distortion. A 5-step LED array is provided for easy monitoring of signal strangth.

Five-Step Audio Level LED Array With Peak LED Indicator

This indicator lights when the receiver's input level from the transmitter exceeds unity.

Channel Selection Knobs and and Power On/Off on Front Panel

Removeable Dual Antennas With BNC Connectors

A true diversity front end with twin antennas reduces multipath distortion caused dropouts to near zero. The supplied antennas are connector mounted (BNC) so that they can be disconnected and/or removed. The BNC antenna connectors are located on the rear panel.

12V DC Input

Plug the supplied AC adapter into the 12 volt input on the receiver then into an AC electrical outlet.

Output Adjustment

Rotate this knob clockwise to increase, or counterclockwise to decrease volume level. Located on the rear panel.

Balanced and Unbalanced Output

The 511DRH features both 1/4-inch and XLR output jacks located on the rear panel.

Variable Tone-Code Squelch

Switching the Audio to OFF on the microphone will cause the receiver to mute due to the tone squelch circuitry in the receiver. This allows the microphone to be handled with no noise.

Azden 511DRH UHF Wireless Receiver Specifications

RF Carrier Frequency Range:

UHF 63 ch. 793 - 806 MHz

Frequency Response:

20Hz - 20kHz

Audio Distortion:

Less than 1% ±15K deviation

Dynamic Range:

better than 100dB

S/N Ratio:

better than 95dB

Operating Temperature:

32º ~ 113º F (0º ~ 45º C)

Operating Range:

100m under ideal conditions

Oscillator:

PLL synthesized

Tone Squelch Frequency:

32.768KHz

Diversity Type:

True Space Diversity

Receiver Type:

Super Heterodyne, PLL Synthesized

Audio Output Impedance:

2.2 k ohms unbal., 660 ohms bal.

Power Requirements:

12V DC 300mA

Dimensions (W x H x D):

8" x 1.7" x 8.3" (204 x 44 x 210mm)

Weight:

42 oz. (1.2kg)

Back to Azden UHF Wireless Microphone/Receiver Systems