Azden 51XT Wireless XLR Plug-in UHF Transmitter
Get Azden 51XT Price / Buy Online
|
|
Shop With Confidence!

Video Direct® is an Authorized Internet e-tailer for Azden
and Many Other Fine Brands!
|
Azden 51XT UHF Wireless XLR Plug-in Transmitter
Features in Detail | Enlarged Image
Continuing the improvement of its Performance Series UHF wireless systems, Azden introduces the new 51XT plug-in transmitter. The 51XT incorporates improvements that will be welcomed by both audio and videography professionals. The 51XT is a compact plug-in transmitter which converts low-impedance microphones to wireless. Using a special 'lock-down' XLR connector for a secure grip, the transmitter is powered for more than 8 hours by a single 9V Alkaline battery. Featured are a separate On/Off switch (with LED indicator), an Audio Standby switch as well as a microphone input level control with Peak indicator LED (allowing the adaptor to transmit the output of a soundboard as well). Additionally, the 51XT provides switched phantom power.
The 51XT is a frequency-agile transmitter with 63 on-board user selectable UHF frequencies with a range of 794MHz to approx. 806MHz. The 51XT will work flawlessly with Azden 500UDR, 411UDR and 511DRH receivers.
Azden 51XT Wireless XLR Plug-in Transmitter Key Features
- Plug-in XLR Microphone Transmitter
- Convert any XLR microphone into a wireless. Usng a special lockdown XLR connector for a secure grip on your mic, the 51XT is powered by a standard AA alkaline battery.
- Input Level Control
- The audio input level control enables you to adjust the input level of the microphone. Turn clockwise to increase, or counter-clockwise to decrease the input level. A small screwdriver is supplied to make these adjustments.
- Power and Audio Switches
- The power ON and OFF switch enables and disables all transmitter functions while the Audio switch ON and OFF turn just the transmitter's audio signal on and off. Switching the Audio to OFF will cause the receiver to mute due to the tone squelch circuitry at the receiver. This allows the microphone to be handled with no noise.
- 63 User-Selectable Frequencies
- The group knob allows you to select any of seven frequency groups (numbered from 0-6). The channel knob allows you to select any of nine frequency channels (numbered from 0-8) within the selected group. This method of group/channel selection provides 63 possible choices (794-806Mhz).
- LED Power and Peak Indicators
- AF PEAK - this indicator lights when the receiver's input level from the transmitter exceeds unity.
POWER - with a fresh battery, this LED lights red when the power switch is turned ON. When the battery level drops to 4 volts this LED will flash on and off. When this happens it is time to replace the batteries.
- Switched Phantom Power
- Allows you the flexibility to use dynamic or condenser microphones (9V or less) with the 51XT.
Azden 51XT Wireless XLR Plug-in Transmitter Specifications
- Frequency Range:
- UHF 63 ch. (793-806MHz)
- FM
- Antenna:
- Internal
- Antenna Pre-emphasis:
- 50 Micro Sec
- MAX Input Level:
- -7dBm
- Microphone Unit:
- Dynamic microphones, 9V or less condenser microphones
- RF Output Power:
- 15mW (50mW max)
- Input Impedance:
- 6k ohms
- Audio Adj Range:
- -63dBm ~ -18dBm
- Battery:
- One 9V (not included)
- Battery Life:
- 6 to 8 Hours with Alkalinc Battery
- Dimensions:
- 40 x 40 X 99(L) mm - (1.6" x 1.6" x 3.9")
- Weight:
- 152g without Battery - (5.4 oz)
Azden 51XT UHF Wireless XLR Plug-in Transmitter
Features in Detail | Enlarged Image
Back to Azden UHF Wireless Microphone/Receiver Systems
|