Azden FMX-42 Four-Channel Field Microphone Mixer Get Azden FMX-42 Price / Buy Online

Shop With Confidence! Video Direct® is an Authorized Internet e-tailer for Azden and Many Other Fine Brands!

The Azden FMX-42 is a most versatile professional field mixer. Weighing just over three pounds without batteries, and designed for maximum flexibility, the FMX-42 portable mixer has all the features required for in-field audio for video: four Balanced XLR line/mic inputs with individual Level and Pan controls; switchable (per input) 48V phantom power and limiting; professional grade VU meters for accurate level setting; master level control; 1K tone generator; two balanced XLR outputs (line/mic switchable); a stereo mini jack output for DV cams and headphone monitor with level control.

The FMX-42 can be powered by six AA batteries or an optional 12V power supply. It comes with a ballistic nylon case with a clear plastic top over the control panel.

Azden FMX-42 Key Features

Four Balanced XLR Inputs With Individual Level and Pan Controls

Controls the input level of the microphone connected to each input channel. Zero is the lowest (quietest) setting, 10 is the highest (loudest).

Switchable Phantom Power For Each Input

Each mic input has available phantom power (48V DC) with On/Off switch.

Built-in Switchable Limiter For Each Input

The limiter can be switched on to protect against peak distortion due to overload.

Two XLR Outputs, One Mini Jack Output

The FMX-42 features 2 balanced XLR mic/line switchable outputs. Connect a cable from OUTPUT CH A and/or CH B to the mic or line input of your video camera or audio recorder. These outputs accept a standard 3-pin female XLR connector equipped cable.

The UNBALANCE OUTPUT (mini-jack) is designed for video cameras or audio recorders which have mini-jack microphone or line inputs. Because the FMX-42 has low-impedance XLR inputs and a mini-plug output, users of mini DV cameras that have mini-plug microphone inputs can now use high-quality microphones with XLR outputs. The UNBALANCED OUTPUT output is stereo (dual-channel). It is recommended to use a stereo-to-stereo mini cable (not supplied) from the UNBALANCED OUTPUT to the mic or line input of your video camera or audio recorder.

Professional Quality VU Meters for Accurate Level Setting

Configurable Output

One microphone can be mixed to both outputs as well as either single output while two microphones can be mixed to either single output or mixed together to both outputs. When mixing 2 mics, you can also output the audio from one microphone to one channel while outputting the audio from both mics to the other channel.

Headphone Output (Stereo or Mono) With Level Control

The FMX-42 has a 1/4" monitor headphone jack with level control. You can connect a stereo or mono headphone to the MONITOR output. A MONITOR control adjusts the volume level of headphones connected to the MONITOR output. A 3-position switch allows you to monitor either the Left or Right channel or both. Normally, your would set the MONITOR selector to position L/R, allowing you to monitor the sound of all connected microphones using either stereo or mono headphones. If you only want to hear the output from the left channel, use stereo headphones and set the switch to position L. Or, if you only want to hear the output from the right channel, use stereo headphones and set the switch to position R.

POWER On/Off/Low Battery LED Indicator

When the POWER switch is turned ON, the POWER LED will turn green to indicate the power is on and the battery is charged. When the battery voltage level is low, the POWER LED will turn red.

Runs on Ordinary AA atteries

With meter illumination and phantom power off the FMX-42 operates for 10 hours on 6 AA batteries (not supplied).

12V DC Input

The FMX-42 can be run on 6 AA battery power or plug an optional AC adapter into the 12 volt input. A 3-position Power switch allows you to select internal (battery) power, external (AC) power or OFF.

Azden FMX-42 Specifications

Frequency Response:

Balanced and Unbalanced Output: 20-30,000Hz (±1.5dB)
Monitor Output: 30-30,000Hz (±2dB)

Signal-To-Noise:

Balanced Output: -120dBu (A weighted, Input Equivilent Level)

T.H.D.:

Less than 0.005% @ 1KHz (@ LINE position +19dBu output)

Balanced Input:

XLR 3-pin x 4 (CH1, 2, 3 and 4)

Line Input Level

Standard: +4 dBu (electronically balanced)
Maximum: > +26 dBu

MIC Input Level (@ -30):

Standard: -30 dBu (electronically balanced)
Maximum: +4 dBu

MIC Input Level (@ -50):

Standard: -50 dBu (electronically balanced)
Maximum: -11 dBu

Input Impedance:

Line: 20 k ohm
Mic: 2 k ohm

Input High Pass Filter (HPF):

100 Hz - 6 dB/oct

Balanced Output:

XLR 3-pin x 2 (Output L and R)

Unbalanced Output:

3.5 mm (1/8-inch) Stereo mini-jack

Monitor Output:

6.5 mm (1/4-inch) Stereo jack

Balanced Output Level:

Standard: +4 dBu (> 10 k ohm load)
-2 dBu (600 ohm load)
Maximum: +20 dBu (>10 k ohm load)
+13 dBu (600 ohm load)

Unbalanced Output Level 3.5mm Stereo:

Standard:-36 dBu (> 10 k ohm load)
Maximum:-20 dBu (> 10 k ohm load)

Monitor Output 3.5mm Stereo:

Max.: +1 dBu - 32 ohm load (16-100 ohm load recommended)

Tone Generator Output:

1 kHz @ +4 dBu

Output Impedance:

Balanced: 600 ohm
Unbalanced: 120 ohm

Meters Standard Level:

0 VU (+4 dBu)

Phantom Power Voltage:

48V DC (± 4V DC)

Battery Type:

Six Alkaline AA

Battery Life:

Approx. 10 hours (Meter Illum. and Phantom Power OFF)

External Power:

12VDC @ 200 mA

Current Draw:

155 mA (Meter Illum. and Phantom Power OFF - @ 9V)
195 mA (Meter Illum. OFF/Phantom Power ON w/2-SGM-1000 - @ 9V)

Dimensions (H x W x D):

2.2" x 8.7" x 5.9" (56 x 220 x 150.5mm)

Weight without Battery:

3 pounds 1.4 ounces (1.40kg)

Back to Azden Microphone Mixers