Azden WR-PRO Professional Videography VHF Wireless Receiver Get Azden WR-PRO Price / Buy Online 169.445 and 170.245 MHz Get Azden WR-PRO(S) Price / Buy Online 171.105 and 171.845 MHz

Shop With Confidence! Video Direct® is an Authorized Internet e-tailer for Azden and Many Other Fine Brands!

The WR-PRO receiver is the basic receiver for any PRO Series transmitter. It comes with both a shoe mount and velcro. An earphone is included to monitor recorded sound, and two VHF frequencies are available on each model. One 9V battery is required to operate the receiver (batteries not included).

The WR-PRO works with the microphone/transmitters from the Azden WMS-PRO, WH/X-PRO and WLX-PRO systems, and also with the Azden WX/T-PRO, WL/T-PRO and WM/T-PRO microphone/transmitters.

The incredible success of the PRO Series among professional videographers has prompted Azden to add 2 additional frequencies, 171.105 and 171.845, to the most popular professional models, the WR-PRO, WR22-PRO and WDR-PRO receivers and the associated WL/T-PRO, WM/T-PRO, and the WX/T-PRO transmitters. These additiional VHF frequencies will not interfere with Azden's long-established 169.445 and 170.245MHz models. If you wish to use the two new frequencies, order the WR-PRO(S) model. Please be sure your transmitter is also the (S) model - WL/T-PRO(S), WM/T-PRO(S) - or the 169.445 MHz or 170.245 MHz WX/T-PRO.

Azden WR-PRO Receiver Key Features

Power/Frequency Selector Switch

The WR-PRO operates on the low-interference VHF band and has two switchable frequencies, F1 and F2. A slide switch is used to turn the system on/off and select a frequency.

WR-PRO: F1 - 169.445MHz, F2 - 170.245MHz
WR-PRO(S): F1 - 171.105MHz, F2 - 171.845MHz

LED Signal Indicator

The LED has two functions. If you power up the receiver when the transmitter is not on, the LED will blink on and off, indicating the battery is good. When both the receiver and transmitter are on and tuned to the same frequency, the LED will remain on, indicating that a signal is present between the units.

Shoe Mount

The receiver comes with a shoe mount for mounting to a video camera. You can also attach the receiver with the included velcro. The shoe mount can be easily removed when necessary by removing a phillips head screw in the center of the shoe mount.

Output Plug

Connect the plug from the receiver to the camera's Ext Mic Jack.

External Antenna

The receiver comes with a telescoping antenna.

Earphone

To monitor the sound you are recording, the included earphone can be plugged into the receiver's earphone jack. It can be also plugged into the earphone jack of the camcorder, if availble.

Azden WR-PRO Receiver Specifications

Reception Frequency:

WR-PRO: F1 - 169.445MHz, F2 - 170.245MHz
WR-PRO(S): F1 - 171.105MHz, F2 - 171.845MHz

Receiver Type:

Double superheterodyne

Reception Sensitivity:

2µV at S/N 40dB

Battery:

One 9v (not included)

Power Consumption:

25mA

Dimensions (H x W x D):

86mm x 60mm x 21.5mm - (3.4" x 2.4" x .84")

Weight:

128g with Battery - (4.5 oz)

Supplied Accessories:

Earphone, velcro

Back to Azden PRO Series Videography VHF Wireless