Azden WHX-PRO Professional Videography Handheld Microphone VHF Wireless System Get Azden WHX-PRO Price / Buy Online

Shop With Confidence! Video Direct® is an Authorized Internet e-tailer for Azden and Many Other Fine Brands!

A complete system which includes the WM/T-PRO self-contained handheld microphone/transmitter, and the WR-PRO receiver. The WMT-PRO professional hand-held wireless microphone has a range of over 250 ft. and is great for interviews! Both the transmitter and antenna are built into the mike housing, therefore requiring no dangling wires or protruding antennae on the mike. A standby switch on the microphone allows you to pass it around without "touch" noise.

The WR-PRO receiver comes with both a shoe mount and velcro. An earphone is included to monitor recorded sound, and two VHF frequencies are available (169.445MHz and 170.245MHz). One 1.5V AA battery and one 9V battery are required to operate system (batteries not included)

Azden WR-PRO Receiver

WR-PRO Key Features

Power/Frequency Selector Switch

The WHX-PRO operates on the low-interference VHF band and has two switchable frequencies: (F1) 169.445MHz and (F2) 170.245MHz. A slide switch is used to turn the system on/off and select a frequency.

LED Signal Indicator

The LED has two functions. If you power up the receiver when the transmitter is not on, the LED will blink on and off, indicating the battery is good. When both the receiver and transmitter are on and tuned to the same frequency, the LED will remain on, indicating that a signal is present between the units.

Shoe Mount

The receiver comes with a shoe mount for mounting to a video camera. You can also attach the receiver with the included velcro. The shoe mount can be easily removed when necessary by removing a phillips head screw in the center of the shoe mount.

Output Plug

Connect the plug from the receiver to the camera's Ext Mic Jack.

External Antenna

The receiver comes with a telescoping antenna.

Earphone

To monitor the sound you are recording, the included earphone can be plugged into the receiver's earphone jack. It can be also plugged into the earphone jack of the camcorder, if availble.

WR-PRO Specifications

Reception Frequency:

F1 - 169.445MHz, F2 - 170.245MHz

Receiver Type:

Double superheterodyne

Reception Sensitivity:

2µV at S/N 40dB

Battery:

One 9v (not included)

Power Consumption:

25mA

Dimensions (H x W x D):

86mm x 60mm x 21.5mm - (3.4" x 2.4" x .84")

Weight:

128g with Battery - (4.5 oz)

Supplied Accessories:

Earphone, velcro

Azden WM/T-PRO Handheld Microphone/Transmitter

WM/T-PRO Key Features

Professional Handheld Microphone With Built-in Transmitter

Both the transmitter and antenna are built into the mike housing, therefore requiring no dangling wires or protruding antennae on the mike.

Frequency Selector Switch

The WM-PRO operates on the low-interference VHF band and has two switchable frequencies: (F1) 169.445MHz and (F2) 170.245MHz. A small two-position switch on the back of the microphone in the battery compartment is used to select a frequency.

Three-Position Power Switch

The bottom position is OFF, the top position is ON, and the middle is STANDBY. In the STANDBY position the power is on but the microphone element is muted. This allows the microphone to be passed around noiselessly.

LED Signal Indicator

When both the receiver and transmitter are on and tuned to the same frequency, the LED will remain on, indicating that a signal is present between the units. The LED signal indicator displays in both ON and STANDBY power modes.

WM/T-PRO Specifications

Transmission Frequency:

F1 - 169.445MHz, F2 - 170.245MHz

Modulation System:

FM Modulation

Modulation Sensitivity:

94dB SPL at ± 3.5kHz Dev

Battery:

One 1.5v AA (not included)

Power Consumption:

100mA

Dimensions (Circumference, Lenth):

62mm (2.4"), 211mm (8.3")

Weight:

170g with Battery - (6.0 oz)

Microphone:

Unidirectional dynamic

Antenna:

Internal Antenna

Battery Life:

8 to 10 Hours

Back to Azden PRO Series Videography VHF Wireless