Azden WLX-PRO Professional Videography Lapel Microphone VHF Wireless System Get Azden WLX-PRO Price / Buy Online

Shop With Confidence! Video Direct® is an Authorized Internet e-tailer for Azden and Many Other Fine Brands!

A complete system which includes the WM-PRO beltpack transmitter, the EX-503 electret condenser lavalier microphone and the WR-PRO receiver. This professional lapel microphone is great for video taping weddings! The transmitter has a range of over 250 ft. and is small enough to fit in the shirt or pants pocket of the groom or preacher. The receiver can mount on any camcorder having an external mike jack. It comes with both shoe-mount and velcro. An earphone is included to monitor recorded sound. Two 9V batteries (not included) are required to operate system.

Azden WR-PRO Receiver

WR-PRO Key Features

Power/Frequency Selector Switch

The WLX-PRO operates on the low-interference VHF band and has two switchable frequencies: (F1) 169.445MHz and (F2) 170.245MHz. A slide switch is used to turn the system on/off and select a frequency.

LED Signal Indicator

The LED has two functions. If you power up the receiver when the transmitter is not on, the LED will blink on and off, indicating the battery is good. When both the receiver and transmitter are on and tuned to the same frequency, the LED will remain on, indicating that a signal is present between the units.

Shoe Mount

The receiver comes with a shoe mount for mounting to a video camera. You can also attach the receiver with the included velcro. The shoe mount can be easily removed when necessary by removing a phillips head screw in the center of the shoe mount.

Output Plug

Connect the plug from the receiver to the camera's Ext Mic Jack.

External Antenna

The receiver comes with a telescoping antenna.

Earphone

To monitor the sound you are recording, the included earphone can be plugged into the receiver's earphone jack. It can be also plugged into the earphone jack of the camcorder, if availble.

WR-PRO Specifications

Reception Frequency:

F1 - 169.445MHz, F2 - 170.245MHz

Receiver Type:

Double superheterodyne

Reception Sensitivity:

2µV at S/N 40dB

Battery:

One 9v (not included)

Power Consumption:

25mA

Dimensions (H x W x D):

86mm x 60mm x 21.5mm - (3.4" x 2.4" x .84")

Weight:

128g with Battery - (4.5 oz)

Supplied Accessories:

Earphone, velcro

Azden WM-PRO Beltpack Transmitter

WM-PRO Key Features

Compact and Unobtrusive Transmitter Unit With Belt Clip

The WM-PRO transmitter comes with a belt clip. It is small enough to also be tucked into a jacket or pants pocket.

No External Antenna Needed

The lapel mic's cord discretely doubles as the transmitter's antenna.

Power/Frequency Selector Switch

The WM-PRO operates on the low-interference VHF band and has two switchable frequencies: (F1) 169.445MHz and (F2) 170.245MHz. A slide switch is used to turn the system on/off and select a frequency.

WM-PRO Specifications

Transmission Frequency:

F1 - 169.445MHz, F2 - 170.245MHz

Modulation System:

FM Modulation

Modulation Sensitivity:

94dB SPL at ± 2.5kHz Dev

Battery:

One 9v (not included)

Power Consumption:

30mA

Dimensions (H x W x D):

86mm x 60mm x 21.5mm - (3.4" x 2.4" x .84")

Weight:

98g with Battery - (3.4 oz)

Included Microphone:

Omni Lavalier Electret Condenser (EX503)

Back to Azden PRO Series Videography VHF Wireless