KATA Carrying Solutions
KATA designs, develops, and manufactures quality, state-of-the-art protection solutions and carrying systems. Kata's products are designed around the human frame. It's not enough that the equipment fit the case, the case must also fit the user!
KATA established its reputation by outfitting Military and Security Special Forces with auxiliary cases, utility and protective vests and backpacks. Tough, durable, yet remarkably lightweight, Kata products are constructed to withstand rough treatment and harsh conditions over long periods.
 Shop KATA Camera Cases Online
|
|
Shop With Confidence!
Video Direct® is an Authorized U.S. retailer for KATA
and Many Other Fine Brands!
|
KATA Large Camera Carring Cases and Shoulder Bags
The KATA CCC-1A is designed to hold medium to large pro camcorders with the battery and lens installed. It can also hold medium-sized pro camcorders such as the Canon XL-1/XL-1s/XL-2 with the battery and lens installed and many accessories. Engineered to embody the perfect balance, the CCC-1A is an extremely lightweight yet highly protective case. The streamlined ergonomic shape keeps the center of gravity close to your body, and eases the burden when carrying. The double flap top opening ensures quick access to the top grip handle of the camcorder. Included dividers and support cushions enable customization of the interior space to meet specific needs. Additional storage is available in two large padded pockets front and rear, one flat internal pocket and two flat pockets along the side. A designated tripod plate pouch can be found inside the main compartment, and a small set-up card pocket is integrated in the top flap. For safe and easy car transport, dedicated seat belt securing slots are sewn into the handle straps on the left side. Carrying options include built-in interlocking handles and the included Advanced Padded Shoulder Strap. KATA's Insertrolley is an available accessory.
Internal Main Compartment Dimensions: 27.2"x 11.4-7.4" x 11-9.8"
The KATA MCC-2A or Maxi Camera Case is designed to hold large pro camcorders with the battery and lens installed plus many accessories. Engineered to embody the perfect balance, the MCC-2A is an extremely lightweight yet highly protective case. The streamlined ergonomic shape keeps the center of gravity close to your body, and eases the burden when carrying. The double flap top opening ensures quick access to the top grip handle of the camcorder. This top opening design also allows a mini light to remain installed during transport, as the flaps will zip up around it. The MCC-2A has two movable, removable dividers, which allow the user to customize the main compartment for carrying either a big pro camera with a large battery and large lenses or a smaller one with many accessories. An extra long external padded zippered pocket is located on the right side of the bag for long accessories like small stands. Additional storage is available in one smaller flat pocket on the reverse side and two large padded pockets front and rear. A designated tripod plate pouch can be found inside the main compartment, and a small set-up card pocket is integrated in the top flap.
Internal Main Compartment Dimensions: 28.3" x 11.4-7.4" x 12.6-9.8"
KATA's TCCT meets the strict new airline regulations for carry-on bag size. And its modularity means that when you land it adapts to hold your fully assembled camera in everyday use. Once you land, you can expand the case to its working position. The TCCT has a compartment that lengthens the case and a side compartment that makes it wider. Like the turtle's shell, the case and the extended compartments are padded and rigid at the same time, to protect their delicate contents. The detachable trolley (included) makes it easier to transport the bag through the airport.
Internal Main Compartment Dimensions: 22.4-28.45" x 7-9" x 13.4"
The KATA Banana-3 is a heavy-duty production case built to hold lots of equipment -- large and small. The Banana-3 is also perfect for medium and large format out of studio photography. A unique (patent-pending) contoured shape that keeps the weight close to your body makes it easier to carry. The Banana-3 is designed so that its opening faces toward your body when carrying the bag on your shoulder, allowing you to easily view of its contents and access your gear. Thick padding and reinforcing, with plastic boards and aluminum staves, protect your equipment. KATA's Modi-Vers modular divider system enables customizing the bag to your specific needs.
Internal Main Compartment Dimensions: 23.6" x 11.8"-9.5" x 11.8"
The OMB-77 Large One Man Band bag is the ultimate mobile production solution for the solo videographer that does it all. The main internal compartment is designed to be customized using the provided dividers and detachable pouches. It will fit numerous setup configurations to hold, protect and organize all the necessary equipment in just one bag. The One Man Band 77 was designed to fit cameras such as the JVC HD Series, Sony EX3 and Canon XLH1. The camera will fit with mattebox, external mic, mini light and large external battery attached while your headphones, accessories, batteries and more fit in the various divisions and compartments within the bag. It includes a slot for up to a 17-inch laptop or LCD video monitor.
Internal Main Compartment Dimensions: 26.4" x 12.6" x 13.8"
The OMB-75 Large One Man Band bag is the ultimate mobile production solution for the solo videographer that does it all. The main internal compartment is designed to be customized using the provided dividers and detachable pouches. It will fit numerous setup configurations to hold, protect and organize all the necessary equipment in just one bag. The One Man Band 75 was designed to fit cameras such as the Panasonic AG-HVX200/HMC150/HPX170, Sony PMW-EX1/Z1/V1, Canon XH G1s/A1s and similar. Full internal customization lets you create the perfect bag for your unique gear. Carry along a video tripod by strapping to the top of the bag. Numerous external pockets let you organize and quickly access your smaller accessories. Carrying options include interlocking handle, provided shoulder strap and a rear sleeve will let you slide in the optional Kata Insertrolley (see Recommended Accessories) for an easy carting option.
Internal Main Compartment Dimensions: 20.5" x 12.2" x 14.2"
The KATA CCC-10A is designed to hold a medium-sized pro camcorder, such as the Canon XL2, with the battery and lens installed. The CCC-10A is an extremely lightweight yet highly protective case due to its thermoformed laminated foam layer construction. The streamlined ergonomic shape keeps the center of gravity close to your body, and eases the burden when carrying. The double flap top opening ensures quick access to the top grip handle of the camcorder. The entire contents of the CCC-10A are protected by watertight zippers. Included dividers and support cushions enable customization of the interior space to meet specific needs. Additional storage is available in two large padded pockets front and rear, one flat pocket along the side and a small set-up card pocket integrated into the top flap. For safe and easy car transport, dedicated seat belt securing slots are sewn into the handle straps on the left side. A sturdy front grip allows easy stowage and removal. Carrying options include built-in interlocking handles and the included Non-Slip Shoulder Strap. KATA's Insertrolley is an available accessory.
Internal Main Compartment Dimensions: 22.4" x 10.6" x 10.2"
The KATA CB-400 is a compact Camcorder bag designed to be the perfect working tool for cameras such as the Sony EX-3, the Canon XL H1, JVC's HD Series and similar. The distinctive design features two large accessory pockets all along the top, which unfurl when you open the top flap, allowing immediate access to your accessories. The snuggly-protected camcorder compartment is located beneath. Additional storage is available in the two low-profile but high-capacity side pockets. The bag is fabricated from rugged water resistant fabric and features water protective zippers for ultimate weather protection. Carrying options include sturdy handle, well padded non slip shoulder strap and Insertrolley capability (Insertrolley not included, see accessories).
Internal Main Compartment Dimensions: 24.8" x 11.4" x 10.8"
Carry everything you need in just one bag? Kata's One Man Band is the ultimate mobile production solution for the field videographer on the go. Whether in transit or shooting, use just a single One Man Band bag to replace the many bags typically required for field work. The One Man Band delivers Kata-level protection from its watertight zippers to a sturdy aluminum frame and multi-layered foam padding, to ensure the safety of your gear. The OMB-74 Medium One Man Band bag will fit numerous setup configurations to hold, protect and organize all the necessary equipment in just one bag. The One Man Band 74 was designed to fit cameras such as the Sony HVR-A1 or Sony PMW-EX1 or similar. The camera will fit with mattebox, external mic and mini light attached while your headphones, accessories, batteries and more fit in the various divisions and compartments within the bag. It includes a slot for up to a 15.4-inch laptop or LCD video monitor.
Internal Main Compartment Dimensions: 18.1" x 10.2" x 12.2"
The KATA Pro-Light FlyBy-76 PL is a sleek, low profile on-board professional organizer designed to provide the best traveling, storage and working solutions. Lightweight and protective, it will cater to the smallest detail of a professional's working needs. The spring-steel Spine Guard, encased in specially-formed foam, provides ultimate structural protection. TST-reinforced corners, light yet durable RipStop fabrics and meshes, Aeriform foams, Honeycomb panels and Spider Webbing straps all join together to create an extremely protective but light case. The fantastic modularity allows you to make it even lighter by simply removing components that are not necessary for your everyday work.
Internal Main Compartment Dimensions: 20.5" x 13.0" x 8.7"
The OMB-72 Small One Man Band bag is the ultimate mobile production solution for the solo videographer that does it all. The main internal compartment is designed to be customized using the provided dividers and detachable pouches. It will fit numerous setup configurations to hold, protect and organize all the necessary equipment in just one bag. The One Man Band 72 was designed to fit cameras such as the Sony HVR-A1 or Sony PMW-EX1 or similar. The camera will fit with external mic and mini light attached while your headphones, accessories, batteries and more fit in the various divisions and compartments within the bag. This bag complies with most airline regulations for carry-on luggage. Full internal customization lets you create the perfect bag for your unique gear. Carry along a small video tripod by strapping to the top of the bag. Numerous external pockets let you organize and quickly access your smaller accessories.
Internal Main Compartment Dimensions: 18.1" x 6.7" x 12.2"
The KATA Pro-Light FlyBy-74 PL is a sleek, low profile on-board professional organizer designed to provide the best traveling, storage and working solutions. The main compartment will protect and organize a large amount of gear such as one or two Digital SLR camera bodies with six to eight lenses (up to 400 mm), flash and many other photo accessories. Use the numerous modular Aeriform Dividers to custom fit your exact gear needs. Along the back panel is a full-length Elasto-Guard 15.4-inch laptop compartment which when not in use just flattens out of the way. Travel documents and personal effects can be stored in the front flat external pocket. Tripod connecting straps can be attached to the front of the case. Carrying options include vertical and horizontal handles, KATA's GSS Gecko Shoulder Strap and the included Insertrolley for wheel-along transportation.
Internal Main Compartment Dimensions: 17.3" x 12.6" x 6.7"
The KATA Pro-Light Resource-61 PL is a shoulder bag designed specifically for a Digital SLR kitted up with video production gear and accessories. Lightweight and protective, it will cater to the smallest detail of a professional's working needs. A specially-formed internal shield with integrated Spine is encased in the top flap for ultimate protection while TST-reinforced areas, light yet durable RipStop fabrics and meshes, Aeriform foams, Honeycomb panels and Spider Webbing straps all join together to create a sturdy case which is still lightweight. The fantastic modularity allows you to make it even lighter by simply removing components that are not necessary for your everyday work.
Internal Main Compartment Dimensions: 19.3" x 9.4" x 7.9"
The KATA CB-300 is a compact Camcorder bag designed to be the perfect working tool for cameras such as the Sony PMW-EX3, the Canon XL H1 and similar. The distinctive design features two large accessory pockets all along the top, which unfurl when you open the top flap, allowing immediate access to your accessories. The snuggly-protected camcorder compartment is located beneath. Additional storage is available in the two low-profile but high-capacity side pockets. The bag is fabricated from rugged water resistant fabric and features water protective zippers for ultimate weather protection. Carrying options include sturdy handle, well padded non slip shoulder strap and Insertrolley capability (Insertrolley not included, see accessories).
Internal Main Compartment Dimensions: 20.9" x 11.2" x 10.8"
The KATA CC-197 Camera Shoulder Case is a compact, TST padded case designed to hold a range of DV and HDV camcorders. The CC-197 fits camcorders up to the size of the Canon XL H1 or the JVC GY-HD100/110/200/250 with accessories and mounted mattbox. The CC-197 features a reinforced modular bottom panel and a unique viewfinder and microphone circumferential protection in the form of a removable Reinforced Aluminum Frame (RAF). Additional accessories will fit in the remaining space of the main compartment, and the additional full-length interior compartment or the full-length external pocket. Internal dividers are included and if needed additional Modi-Vers dividers are available. The CC-197 lid is secured by a quick closure buckle. One pull allows for a quick full opening of the parallel zipper set. Carrying options include the supplied padded shoulder strap and a padded Mesh-Grip handle.
Internal Main Compartment Dimensions: 26.4" x 11.4" x 11"
The KATA CC-196 Camera Shoulder Case is a compact, TST padded case designed to hold a range of DV and HDV camcorders. The CC-196 features ultimate protection and portability for medium-sized digital camcorders such as the Sony EX3, Canon XL H1 or JVC GY HD Series with accessories and mattbox. The CC-196 features a reinforced modular bottom panel and a unique viewfinder and microphone circumferential protection in the form of a removable Reinforced Aluminum Frame (RAF). Accessories will fit in the modular main compartment with the camera, in the additional long compartment or in the full-length external pocket. Internal dividers are included.
Internal Main Compartment Dimensions: 23.6" x 11.4" x 11"
The KATA Banana-2 is a professional photographer's roomy shoulder bag and a heavy-duty production case built to hold lots
of equipment -- large and small. A unique (patent-pending) contoured shape that keeps the weight close to your body makes it easier to carry. Carrying options for the Banana-2 include a shoulder strap, KATA's unique patented interlocking handles or two side grips. The Banana-2 is designed so that its opening faces toward your body when carrying the bag on your shoulder, allowing you to easily view of its contents and access your gear. The main compartment and the external and internal pockets will store 2-3 digital SLR bodies with their lenses attached, 4-6 additional lenses and many more accessories, from small media cards to a field tripod.
Internal Main Compartment Dimensions: 21.7" x 11" x 10.6"
The KATA CB-200 is a compact Camcorder bag designed to be the perfect working tool for cameras such as the Panasonic AG-HVX200, AG-HPX170 and AG-HMC150, the Canon XH A1s and XH G1s, the Sony HVR-V1, HVR-Z1, HVR-Z5, HVR-Z7 and similar. The distinctive design features two large accessory pockets all along the top, which unfurl when you open the top flap. The snuggly protected camcorder compartment is located beneath so when you are out and working the access to your accessories is rapid and immediate. Additional storage is available in the two low-profile but high-capacity side pockets. The bag is fabricated from rugged water resistant fabric and features water protective zippers for ultimate weather protection. Carrying options include sturdy handle, well padded non slip shoulder strap and Insertrolley capability (Insertrolley not included, see accessories).
Internal Main Compartment Dimensions: 17.7" x 10.0" x 9.6"
The KATA PR-460 Photo Reporter shoulder bag was created for the reporter on the move, ready to grab and go at any moment. It provides easy accessibility to your gear, keeping you ready to capture that split-second shot. The PR-460 fits 2-3 digital SLR bodies and 4-5 lenses (up to 300mm) plus accessories and a laptop up to 15 inches. Customize the internal compartment with the modular dividers while an internal removable pad lets you define the rigidity of the bag, allowing you to either leave in for a more protective bag or to take out to make the bag more compactness in tight situations. A top access opening allows you to easily reach your equipment from the top of the bag without having to open the entire bag. The quick release buckle lets you easily access all your gear within the bag.
Internal Main Compartment Dimensions: 13.4" x 6.3" x 9.8"
The KATA D-Light Capsule-185 DL is stylish, functional lightweight, protective case which is designed to carry camcorders such as the Sony PMW-EX3, the Canon XL H1, JVC's HD Series and similar. A TST RIB running down the middle of the bag and an Aluminum Skeleton stave which arcs across the mid section provide structural protection while light yet durable RipStop fabrics, Honeycomb Panels and Aeriform foams join together to create a lightweight protective compact case. The included Lens Pillow fits snugly under your lens to perfectly stabilize your camcorder. A Rain Cover is also included for protection in rough weather conditions. Carrying options include an interconnected 3 handle and 1 shoulder strap system, while Insertrolley connection is available for wheel-along transportation (Insertrolley not included, see accessories).
Internal Main Compartment Dimensions: 19.7" x 11.8" x 9.8"
The KATA ABS-HD Air Bag System is the perfect protective solution for globe trotting camcorders and cameramen. Forget about fighting to get your camcorder bag on board with you, Say farewell to the days of wrapping up your camcorder in blankets and hoping that the other suitcases up there don't smash it up. With KATA's ABS you have protection you can always get on board! This simple inflatable protective casing comes folded up in a compact pouch no larger than a book.
External Maximum Dimensions: 27.6" x 10.2" x 11.0"
Deflated External Dimensions: 7.9" x 3.1" x 7.1"
The KATA CB-100 is a compact Camcorder bag designed to be the perfect working tool for cameras such as the Sony HVR-A1 up to the Panasonic AG-DVC30, the Canon GL2 and XM2 and similar. The distinctive design features two large accessory pockets all along the top, which unfurl when you open the top flap. The snuggly protected camcorder compartment is located beneath so when you are out and working the access to your accessories is rapid and immediate. Additional storage is available in the two low-profile but high-capacity side pockets. The bag is fabricated from rugged water resistant fabric and features water protective zippers for ultimate weather protection. Carrying options include sturdy handle, well padded non slip shoulder strap and Insertrolley capability (Insertrolley not included, see accessories).
Internal Main Compartment Dimensions: 13.8" x 8.9" x 8.9"
The KATA PR-440 Photo Reporter shoulder bag provides easy accessibility to your gear, keeping you ready to capture that split-second shot. The PR-440 fits 1-2 digital SLR bodies and 3-4 lenses (up to 300mm) plus accessories. Customize the internal compartment with the modular dividers while an internal removable pad lets you define the rigidity of the bag, allowing you to either leave in for a more protective bag or to take out to make the bag more compactness in tight situations. A top access opening allows you to easily reach your equipment from the top of the bag without having to open the entire bag. The quick release buckle lets you easily access all your gear within the bag. The provided elements cover easily fits over the bag to protect in rainy situations with the black side and in extreme sunny situations with the silver side to keep the bag cool.
Internal Main Compartment Dimensions: 11.4" x 6.3" x 7.9"
The KATA PR-420 Photo Reporter shoulder bag was created for the reporter on the move, ready to grab and go at any moment. It provides easy accessibility to your gear, keeping you ready to capture that split-second shot. The PR-420 fits 1-2 digital SLR bodies and 2-3 lenses (up to 200mm) plus accessories. Customize the internal compartment with the modular dividers while an internal removable pad lets you define the rigidity of the bag, allowing you to either leave in for a more protective bag or to take out to make the bag more compactness in tight situations. A top access opening allows you to easily reach your equipment from the top of the bag without having to open the entire bag. The quick release buckle lets you easily access all your gear within the bag.
Internal Main Compartment Dimensions: 10.2" x 6.3" x 7.9"
The KATA OC-84 features two full-sized compartments. The deep main compartment, designed for the photographic equipment can be customized to fit 2-4 Digital SLR bodies with 6-8 lenses and accessories, or a Medium Format Kit. If additional division is necessary, a Modi-Vers Kit is included. The second shallower compartment is designed to hold a laptop or paperwork. A laptop case is supplied with the OC-84 and can also be used individually. A large external padded pocket for personal effects and an internal accessory pocket panel will allow for additional storage solutions. External straps are available to connect a small tripod. The OC-84 features 2 strong padded handles for top and side carrying, a BSS shoulder strap and an included Insertrolley. The OC-84 can also be used as a Lighting Bag for a small lighting kit.
Internal Main Compartment Dimensions: 18.1" x 13.3" x 6.2"
The KATA OC-82 Photo Organizer Case is designed to withstand hard use in any environment. Kata's TST technology on the front of the bag and the honeycomb-reinforced circumference provide ultimate protection for the gear within. The KATA OC-82 features two full-sized compartments. The deep main compartment, designed for the photographic equipment can be customized to fit 1-2 Digital SLR bodies with 3-4 lenses and accessories. The second shallower compartment is designed to hold a laptop or paperwork. An external padded pocket for personal effects and an internal accessory pocket panel will allow for additional storage solutions. External straps are available to connect a small tripod. The OC-82 features a strong padded carrying handle and a BSS shoulder strap.
Internal Main Compartment Dimensions: 13.3" x 9.8" x 6.2"
The KATA WS-606 Large Waist-Shoulder Bag is the perfect shoulder bag for the digital pro photographer or digital pro videographer on the go. In its spacious main compartment, three large pockets, four flat pockets and secured to the tying loops (for extra-long equipment like a tripod), the WS-606 will store all you need. For digital pro photographers the WS-606 can carry 2-4 digital SLR bodies, 6-10 lenses, flash, battery packs, filters, tripod, PDA and other photo and personal accessories. For the digital pro videographer, the KATA WS-606 will hold a DV or HD camcorder such as the JVC DV300, Panasonic HVX200, Sony HDR-FX1 or similar, with many accessories. Optional KATA Modi-Vers Divider Kits are available for customizing the internal compartment.
Internal Main Compartment Dimensions: 14.1" x 10.2" x 9.4"
The KATA WS-604 Waist-Shoulder Bag is the perfect shoulder bag for the digital pro photographer or digital pro videographer on the go. The WS-604 is ergonomically designed to allow you to shoot from the hip without taking the case off your shoulder. The WS-604 is designed so that it opens away from the body via a quick release buckle, allowing you to easily view of its contents and access your gear when carrying the bag. A unique contoured shape that keeps the center of gravity close to your body makes it easier to carry. Two DP Buckles ensure the correct Case-Strap-Carrier angle very time. A 3D hip pad with a concealed hip belt offers additional support and weight distribution when needed, and the belt tucks neatly away when not. KATA's ergonomic Non-Slip Shoulder strap is included.
Internal Main Compartment Dimensions: 12.6" x 8.3" x 7.9"
The KATA CC-195 Camera Shoulder Case is a compact, TST padded case that fits camcorders up to the size of the JVC GY-HD100U and Canon XL HD1. The CC-195 features a reinforced modular bottom panel and a unique viewfinder and microphone circumferential protection in the form of a removable Reinforced Aluminum Frame (RAF). Accessories will fit in the remaining space of the main compartment, the additional long compartment or the full-length external pocket. Internal dividers are included and if needed additional Modi-Vers dividers are available. The CC-195 lid is secured by a wide "hook & loop" fastener and a side-release buckle. One pull allows for a quick full opening of the parallel zipper set. Carrying options include the BSS Shoulder Strap and a padded Mesh-Grip handle.
Internal Main Compartment Dimensions: 22.8" x 10.2" x 11"
The KATA CC-193 Camera Shoulder Case is a compact, padded, TST case designed to hold a range of small digital camcorders or a digital SLR with tele lens and hood attached. The CC-193 will hold the Sony HDV-Z1 and HDV-FX1 Hi-Def camcorders, the Sony PD170 and Panasonic DVX100A and similar. Accessories will fit in the remaining space of the main compartment, the additional long compartment or the full-length external pocket. Internal dividers are included and, if additional division is desired, Kata's Modi-Vers Kits are available. The CC-193 lid is secured by a wide "hook & loop" fastener and a side release buckle. One pull allows for a quick full opening of the parallel zipper set. Carrying solutions include KATA's BSS Shoulder Strap and a padded Mesh-Grip handle.
Internal Main Compartment Dimensions: 21.2" x 8.6" x 10.2"
The KATA CS-17 Camera Satchel is designed to allows you to get on with your business without advertising the fact that you are carrying high end camera gear with you. At a first glance it looks like any other fashionable satchel. It will carry your 17-inch laptop and daily personal effects. It can also carry a full photographic set, including a Digital SLR with lens attached plus two additional lenses (up to a 70-200 lens with reversed hood) and accessories. The dedicated insert will snugly protect the main kit, while in the remaining space, rear documents pocket, internal organizer and two external pockets you'll find more then enough room to store and organize all the rest of what you need. If more room is required the bag's width can be expanded by simply opening the zipper that runs along the sides and the bottom.
Internal Main Compartment Dimensions: 16.1" x 5.9-7.9" x 12.6"
The KATA D-Light Capsule-183 DL is stylish, functional lightweight, protective case which is designed to carry camcorders such as the Panasonic AG-HVX200, AG-HPX170 and AG-HMC150, the Canon XH A1s and XH G1s, the Sony HVR-V1, HVR-Z1, HVR-Z5, HVR-Z7 and similar. A TST RIB running down the middle of the bag and an Aluminum Skeleton stave which arcs across the mid section provide structural protection while light yet durable RipStop fabrics, Honeycomb Panels and Aeriform foams join together to create a lightweight protective compact case. The included Lens Pillow fits snugly under your lens to perfectly stabilize your camcorder. A Rain Cover is also included for protection in rough weather conditions. Carrying options include an interconnected 3 handle and 1 shoulder strap system, while Insertrolley connection is available for wheel-along transportation (Insertrolley not included, see accessories).
Internal Main Compartment Dimensions: 16.5" x 9.8" x 8.3"
The CC-192 is a compact, TST padded case designed to hold a range of consumer and prosumer Mini DV and HDV camcorders such as the Sony V1, the Panasonic DVX 100 and HVX 200, the Canon XH G1 and XH A1, ans the JVC HD1U. Additional accessories will fit in the remaining space of the main compartment, and the additional full-length interior compartment or the full-length external pocket. Internal dividers are included and if needed additional Modi-Vers dividers are available. The CC-192 lid is secured by a quick closure buckle. One pull allows for a quick full opening of the parallel zipper set. Carrying options include the supplied padded shoulder strap and a padded Mesh-Grip handle.
Internal Main Compartment Dimensions: 19.7" x 7.8" x 7.8"
The KATA CS-15 Camera Satchel is designed to allows you to get on with your business without advertising the fact that you are carrying high end camera gear with you. At a first glance it looks like any other fashionable satchel. It will carry your 15-inch laptop and daily personal effects. It can also carry a full photographic set, including a Digital SLR with lens attached plus two additional lenses (up to a 70-200 lens with reversed hood) and accessories. Another great feature in this bag is the discreet access through the top zippered opening. When the insert is closed, this allows you to get to your personal stuff without exposing your bag's valuable contents. Leave the insert open within the bag when you're ready to work and need quick access to your gear. Carrying options include a sturdy handle, non-slip ergonomic shoulder strap and Insertrolley connection (Insertrolley sold separately, see accessories).
Internal Main Compartment Dimensions: 13.8" x 5.9-7.9" x 11.4"
The KATA CC-191 Camera Shoulder Case is a smaller version of the KATA CC-193 designed to hold a range of small digital camcorders or a digital SLR with tele lens and hood attached. The CC-191 will hold the Canon GL2, XM2, Panasonic DVC30, Sony PDX10 and similar camcorders. Accessories will fit in the remaining space of the main compartment, the additional long compartment or the full-length external pocket. Internal dividers are included and, if additional division is desired, Kata's Modi-Vers Kits are available. The CC-193 lid is secured by a wide "hook & loop" fastener and a side release buckle. One pull allows for a quick full opening of the parallel zipper set. Carrying solutions include KATA's BSS Shoulder Strap and a padded Mesh-Grip handle.
Internal Main Compartment Dimensions: 11.8" x 8.7" x 7.1"
The KATA ABS-HDV Air Bag System is the perfect protective solution for globe trotting camcorders and cameramen. Forget about fighting to get your camcorder bag on board with you, Say farewell to the days of wrapping up your camcorder in blankets and hoping that the other suitcases up there don't smash it up. With KATA's ABS you have protection you can always get on board! This simple inflatable protective casing comes folded up in a compact pouch no larger than a book.
External Maximum Dimensions: 17.3" x 10.2" x 11.0"
Deflated External Dimensions: 7.9" x 3.1" x 4.7"
The KATA D-Light Capsule-181 DL is stylish, functional lightweight, protective case which is designed to carry camcorders such as the Panasonic AG-HMC40, the Canon GL2, the Sony HVR-A1 and similar. A TST RIB running down the middle of the bag and an Aluminum Skeleton stave which arcs across the mid section provide structural protection while light yet durable RipStop fabrics, Honeycomb Panels and Aeriform foams join together to create a lightweight protective compact case. The included Lens Pillow fits snugly under your lens to perfectly stabilize your camcorder. A Rain Cover is also included for protection in rough weather conditions. Carrying options include an interconnected 3 handle and 1 shoulder strap system, while Insertrolley connection is available for wheel-along transportation (Insertrolley not included, see accessories).
Internal Main Compartment Dimensions: 16.5" x 9.8" x 8.3"
The KATA CC-190 Camera Shoulder Case is a very compact, TST padded case designed to hold small DV and HDV camcorders like the Sony HDR-HC1 and similar. Accessories will fit in the remaining space of the main compartment, the full-length internal side compartment or the large external pocket. Internal dividers are included and if needed additional Modi-Vers dividers are available. One pull allows for a quick full opening of the parallel zipper set. Carrying options include the BSS Shoulder Strap and a rear belt connection that allows the CC-190 to be worn as a wait pack (belt not included).
Internal Main Compartment Dimensions: 10.2" x 3.9" x 4.7"
The KATA D-Light Hybrid-537 DL will carry and protect both your still camera and your video camcorder in a single bag that can be split in two when desired. A TST RIB running down the middle of one of the components provides structural protection while light yet durable RipStop fabrics and foams join together to create a lightweight protective compact case, perfect for everyday use. The bag consists of two pouches and each can hold a variety of gear. The larger pouch will hold a Digital SLR with an additional lens or flash plus some small accessories or a small HDV camcorder, while the smaller pouch will carry one of the following: a compact HDV camcorder, a bridge camera or a compact Digital SLR. An external Elasto-Guard pocket on each pouch is useful to store small accessories you need close at hand. Tripod connecting straps can be attached to the large pouch or to the combined bag when both components are interconnected.
Large Pouch Internal Dimensions: 8.3" x 5.1" x 7.9"
Small Pouch Internal Dimensions: 5.1" x 3.9" x 7.9"
KATA's Digital Bag DB-455, part of the Digital Photo Series (DPS), is a satchel type bag which features unique TST RIB structural protection, a designated padded laptop compartment and a Digital SLR or camcorder camera insert. This bag is great for everyday use also when not carrying a camera as the spacious main compartment can be used with or without the camera insert. When not shooting, take the camera insert out to use the bag as an everyday pack. Additional storage options include a large external pocket which allows quick zippered access to the essentials stored in the organizer panel within, and two flexible Elasto-Guard side pockets for water bottles and more. The DB-455 features a designated laptop compartment to hold and protect up to a 15-inch laptop.
Internal Main Compartment Dimensions: 13.4" x 6.5" x 11.2"
The KATA D-Light Hybrid-531 DL will carry and protect both your still camera and your video camcorder in a single bag that can be split in two when desired. A TST RIB running down the middle of one of the components provides structural protection while light yet durable RipStop fabrics and foams join together to create a lightweight protective compact case, perfect for everyday use. The bag consists of two similarly-sized pouches and each can hold a variety of gear. One pouch will hold a compqact Digital SLR or bridge camera, while the other pouch will store a compact HDV camcorder. Both are equipped with an internal accessory pocket and a horizontal divider under which cables can be stored. When the dividers are not in use they fold against the inner wall, allowing you full use of the space. An external Elasto-Guard pocket on each pouch is useful to store small accessories you need close at hand. Tripod connecting straps can be attached to the large pouch or to the combined bag when both components are interconnected.
Pouch 1 Internal Dimensions: 3.9" x 3.9" x 6.9"
Pouch 2 Internal Dimensions: 3.9" x 3.9" x 6.9"
KATA's Digital Bag DB-453, part of the Digital Photo Series (DPS), is a satchel type bag which features unique TST RIB structural protection, a designated padded laptop compartment and a Digital SLR or camcorder camera insert. This bag is great for everyday use also when not carrying a camera as the spacious main compartment can be used with or without the camera insert. When not shooting, take the camera insert out to use the bag as an everyday pack. Additional storage options include a large external pocket which allows quick zippered access to the essentials stored in the organizer panel within, and two flexible Elasto-Guard side pockets for water bottles and more.
Internal Main Compartment Dimensions: 11.2" x 5.3" x 9.3"
|
Email Us