Manfrotto 701RC2,745MF3K 745MF3 MDeVe Tripod/701RC2 Mini Video Head Kit Get Manfrotto 701RC2,745MF3K Price / Buy Online

Shop With Confidence! Video Direct® is an Authorized U.S. retailer for Manfrotto and Many Other Fine Brands!

The 701RC2,745MF3K is a complete kit consisting of the Manfrotto 745MF3 MagFiber MDeVe Tripod, the 701RC2 Mini Video Head and the MBAG80P Padded Tripod Bag. The 745MF3 is one of the most innovative tripods of the MDEVE series due to the combination of low weight (carbon fiber for the legs/magnesium die casting) and high load capacity materials used for its construction. This two-stage tripod is specifically geared towards "on-the-go" videographers looking for a simple, straightforward tripod without sacrificing stability. The 745MF3 is ideal for travel, quickly folding up to a compact 24.8 inches and weighing only 4.4 pounds.

Small and lightweight, the 701RC2 fluid video head is capable of accommodating a payload of up to 8.8 pounds, and is ideal for set-ups such as a fully-equipped 3 CCD mini DV camcorder or a spotting scope combined with a digital still or video camera for digiscoping purposes. The 701RC2 is one of the most compact and lightweight two-way heads found on the market and was designed to support the latest digital video equipment. The MBAG80P Padded Tripod Bag is made of durable ballistic nylon and is equipped with a shoulder strap and zip fastener.

Manfrotto 745MF3 MagFiber MDeVe Tripod

The much-heralded arrival of the digital era has brought with it a drastic reduction in weight and size of video camera equipment, matched by enormous advances in the picture quality achievable with the most minuscule of systems. Those working in the video sector are demanding camera supports that are tailored to these small new cameras but that make no compromises in key areas such as rigidity which could jeopardize the fluidity and smoothness of camera movements. It is out of these demands that Manfrotto's MDeVe series was born.

The Manfrotto 745MF3 MagFiber MDeVe Tripod tripod provides high performance with an extremely compact and lightweight structure. The 745MF3 is made of aluminum and has carbon fiber leg sections with magnesium castings. This two-stage tripod is specifically geared towards "on-the-go" videographers looking for a simple, straightforward tripod without sacrificing stability. With a maximum load capacity of 13.2 pounds, the Manfrotto 745MF3 video tripod is designed to handle payloads commonly associated with Mini DV or DVCAMs. An integrated 50mm leveling ball allows for quick set up with ±15° of leveling capability. The 745B is ideal for travel, quickly folding up to a compact 24.8 inches and weighing only 4.4 pounds. For applications that demand full extension, the 745MF3 has a maximum working height of 52.5 inches. For low shots, the 745MF3 can provide support as low as 8.7 inches with all three legs opened to a full 90 degrees.

745MF3 MDeVe Tripod Key Features

Mounted on a built-in 50mm half bowl leveling system

Carbon Fiber Leg Sections With Magnesium Castings

The best tripod is still the one you bring along. Lightweight tripods have not only become a mainstay, they are now a requisite for digital photographers. The trick is to lose weight and maintain maximum support without sacrificing stability, rigidity and reliability. The 745MF3 is one of the most innovative tripods of the MDEVE series due to the combination of low weight (carbon fiber for the legs/magnesium die casting) and high load capacity materials used for its construction.

Built-in 50mm Half Bowl Leveling System

The 745MF3 differs from the 754, 755B and 756XB MDeVe tripods by utilizing an integrated 50mm leveling ball instead of a center column. This allows for quick set up with 15 degrees of leveling capability, and contributes to making the 745MF3 ideal for travel, weight, and compactness.

Four Different Leg Angle Settings

Quick action lever leg lock system (45º)

Rapid-Action Lever Leg Locks

Rubber Feet

Single Tube Leg Profile Made of Carbon Fiber

Secure-Locking Mountings

Tripod to head connection via a platform with 3/8" male thread, built-in spirit level and three grub screws for secure locking mountings.

745MF3 MDeVe Tripod Specifications

Four Leg Angle Settings

Maximum Height

52.5 inches

Minimum Height

8.7 inches

Closed Length

24.8 inches

Leg Sections

3

Maximum Load Capacity

13.2 lbs.

Weight

4.4 lbs.

Manfrotto 701RC2 Mini Video Head

Small and lightweight, the 701RC2 fluid video head is capable of accommodating a payload of up to 8.8 pounds, and is ideal for set-ups such as a fully-equipped 3 CCD mini DV camcorder or a spotting scope combined with a digital still or video camera for digiscoping purposes. The 701RC2 is one of the most compact and lightweight two-way heads found on the market and was designed to support the latest digital video equipment, including Mini DV and the latest prosumer/professional compact Hi Definition camcorders.

1 - Tilt Locking Knob 2 - Pan Locking Knob 3 - Spirit Level

701RC2 Mini Video Head Key Features

Fluid Movement

Fluid drag on the 701RC2 is fixed and provides smooth control through 360º pan and +90º to -60º tilt.

Quick-Release Sliding Plate With VHS Pin

The 701RC2 is equipped with a fixed 3.3 lb counterbalance spring and a sliding plate which can shift from +15mm to -15mm to deliver a wide range of balancing positions. The sliding quick-release video plate system is based on the 200PL-14 equipped with the usual VHS pin.

Independent Pan and Tilt Locks

The 701RC2 Mini Video Head has separate pan and tilt locking mechanisms to the head to adjust in many positions.

Fixed Length Pan Bar With Soft Handle

4 - Plate Release Lever 5 - Quick Release Plate

Built-in Spirit Level

701RC2 Mini Video Head Key Specifications

Maximum Load Capacity

8.8 lbs.

Head Height

4 inches

Tilt

+90º -60º

Tilt Drag

1 fixed

6 - Sliding Top 7 - Graduated Scale for Sliding Top 8 - Sliding Top Knob

Independent Tilt Lock

Yes

Pan

360º

Pan Drag

1 fixed

Independent Pan Lock

Yes

Temperature Range

4º F / 140º F

Flat Base

3/8" female thread to mount on 75 mm ball or flat top tripod

Quick Release Plate

Supplied with: 1/4-20" camera screws

Weight

1.8 lbs.

Manfrotto MBAG80P Padded Tripod Bag (31.5")

Innovative design and style: ballistic nylon, zips and other materials used are of top quality and designed in collaboration with Kata Carrying Systems.

MBAG80P Padded Tripod Bag Key Features

End Opening Allows for Faster "Quiver" Style Extraction and Insertion of Tripod

Zip extends down the length of the bag, but also fully opens the top end of the bag, making it easier to get your tripod in and out, as well as being able to extract the tripod quickly.

Easy-grip zip opening, padded ends

Ergonomic Design

Asymmetric tapered shape allows you to store the tripod with the head attached. Tripod legs fit comfortably in the narrower end (diameter 13cm - 5.1") and extra space is allowed for the larger volume of the head at the wider end (diameter 15cm - 5.9"). This also means it's easier to put the tripod and head in the bag, even if the head levers and knobs are fitted and jut out slightly.

Durable Materials, Padded End Cap

Thermoform padding holds the tripod in place and protects it, especially the head, during transport. Serves a double purpose by protecting you from the tripod's hard edges when carrying it by your side. Logo end cap is padded to offer protection to the tripod head. High quality durable materials, and padded ends protects your tripod throughout.

Easy-Grip Zip Opening

Shoulder Strap Included

Back to Manfrotto Prosumer MiniDV Digital Tripod Kits