Panasonic EYC140B 14.4V Lithium Ion Cordless Impact Driver/Drill and Driver Combo Kit
 Get Panasonic EYC140B Price / Buy Online
|
|
Shop With Confidence!
Video Direct® is a Panasonic
Authorized Internet etailer
and for Many Other Fine Brands!
|
Kit includes: Pansasonic EY7440LN2S 14.4V Lithium Ion Cordless Drill and Driver, Pansasonic EY7540LN2S 14.4V Lithium Ion Cordless Impact Driver, two Pansasonic 14.4V 3.0Ah Lithium Ion battery packs, Panasonic EY0L80B 7.2 - 24V Lithium Ion Universal Charger and a molded plastic carrying case.
The powerful Pansasonic EY7540LN2S 14.4V Lithium Ion Cordless Impact Driver delivers 1,330 in. lbs. of torque. More power makes short work of even tough jobs. Tighten long wood screws and large-diameter bolts quickly. Three adjustable torque levels allow for a clean finish. The Pansasonic EY7440LN2S 14.4V Lithium Ion Cordless Drill and Driver is lighweight and powerful, weighing in at 3.5 pounds and delivering 390 in. lbs. of torque.
To meet the needs of professional tradesmen around the globe, all Panasonic Cordless Power Tools are carefully constructed based on four primary principles: cordless capability, power, lightweight, and ergonomic design. Since Panasonic tools are all cordless, they can be used almost anywhere the professional requires. The inverter charger technology used in Panasonic's Ni-MH battery charging system allows for long battery pack life and quick re-charging time. Plus, there's no compromise in power -- Panasonic tools provide more than enough punch using motors with high-power magnets, heat resistant brushes and built-in cooling fans.
For your comfort, the advanced ergonomic design of Panasonic tools means they're compact, well-balanced and easy to operate for extended periods of time without fatigue. Successfully combining technology with durability, these lightweight tools are full of helpful features and provide reliable solutions that tradesmen can utilize for all their construction needs.
Panasonic EYC140B Combo Kit Key Features
Pansasonic EY7540LN2S 14.4V Lithium Ion Cordless Impact Driver
- Brushless Motor and Electronic Switch
- By using microcomputer control, and with no brushes and a commutator that effect the lifespan of the motor, a longer lifespan is realized. Does not overheat, decreases the amount of electricity used by approximately 20% compared to Pansonic's conventional model. Due to improvement in motor performance efficiency, it is difficult for the temperature of the main unit to increase even during heavy construction work. Long periods of work can be handled comfortably. The brushless motor delivers 20% more efficiency resulting in longer runtime per charge for the battery pack. The lifespan of the electronic switch is about twice as long a conventional switch.
- Electronic Performance Monitoring System
- The EY7540LN2S's Overdischarge Prevention Sensor system cuts off power to the motor before the battery voltage falls too low and flashes a warning lamp on the tool's control panel. Its Battery Overheat Protection Sensor cuts off power to the motor before the battery temperature rises to a harmful level and flashes a warning lamp on the tool's control panel.
- Compact Size
- The Impact Driver has a length of 6-1/2 inches and weighs just 3.1 pounds.
- Three Levels Of Impact Power
- Adjustable torque levels for a clean finish! When the tightening torque level is too high, small screws are tightened faster but screw heads can be stripped off. In this case, select the torque power to High, Medium or Low. Power can be selected depending on the work and materials.
- High Power
- Max. Torque - 1,330 in. lbs.
- Speeds
- High/Hard mode: 0-2,300 rpm
Medium mode: 0-1,400 rpm
Low/Soft mode: 0-1,000 rpm
- High Capacity 3.0 Ah Li-ion battery pack
- 50 Minute Charging System
- 50 minutes to full charge using the kit's included EY0L80B charger.
- Variable Speed / Reversible
- 1/4-inch Hex Quick Connect Chuck
- Electric Brake
- LED Work Light
- Belt Hook
Pansasonic EY7440LN2S 14.4V Lithium Ion Cordless Drill and Driver
- Electronic Performance Monitoring System
- The EY7440LN2S's Overdischarge Prevention Sensor system cuts off power to the motor before the battery voltage falls too low and flashes a warning lamp on the tool's control panel. Its Battery Overheat Protection Sensor cuts off power to the motor before the battery temperature rises to a harmful level and flashes a warning lamp on the tool's control panel.
- Compact Size
- The Impact Driver has a length of 7-1/2 inches and weighs just 3.5 pounds.
- High Power
- Max. Torque - 390 in. lbs.
- Speeds
- 2 speed gearbox: Low 60-400 rpm, High 200-1350 rpm
- High Capacity 3.0 Ah Li-ion battery pack
- 50 Minute Charging System
- 50 minutes to full charge using the kit's included EY0L80B charger.
- Variable Speed / Reversible
- Clutch
- 18-stage plus drill position
- 1/2-inch Heavy Duty Keyless Chuck
- Electric Brake
- LED Work Light
- Belt Hook
Panasonic EY0L80B Charger, Two Panasonic 14.4V 3.0Ah Lithium Ion Battery Packs
- Fast Charging
- The 3.0Ah Ni-MH battery can be fully charged in 50 minutes (using the EY0L80B charger), which means less time spent waiting and more time spent working.
- 7.2 - 24V Universal Charger
- Lithium Ion Battery Packs
- High electrical efficiency lets cobalt lithium batteries deliver greater output and longer service life than manganese lithium batteries.
- Panasonic Solid Solution (PSS) Technology
- Panasonic Solid Solution (PSS) Technology delivers dramatically improved safety, exceptional reliability, and high output.
- Individual Cell Monitoring
- Individual battery cells are independently monitored to ensure optimal discharge control, preventing both overcharging and overdischarging.
- Overdischarge Prevention Sensor
- Overdischarge Prevention Sensor system cuts off power to the motor before the battery voltage falls too low and flashes a warning lamp on the tool's control panel.
- Battery Overheat Protection Sensor
- Battery Overheat Protection Sensor cuts off power to the motor before the battery temperature rises to a harmful level and flashes a warning lamp on the tool's control panel.
Carrying Case
- Molded Plastic
 More Panasonic Cordless Power Tool Combo Kits
|
Email Us
